Home > Products > Strike Anchors
Home > Products > Strike Anchors

Strike Anchor - A Hammer Drive Expansion Anchor

Strike anchors, also known as hit anchors, are intended for light to heavy-duty applications, anchoring into concrete, brick or block. It is composed of a hollow sleeve, a hardened drive pin, integrated nut and washer for keeping track of parts. The strike anchor is normally inserted into a pre-drilled and cleaned hole in the concrete. Then set it just by striking the pin down to create expansion.

A yellow zinc plated strike anchor contains a hollow sleeve, strike pin, integrated nut and washer.
Yellow zinc plated strike anchors - a good choice for many outdoor construction applications.

Advantages:

  • High quality - made from quality carbon steel in grade of 4.8.
  • Reliable - hardened drive pin retains its original shape even being struck fiercely.
  • High strength - enables the strike anchor to withstand unusual toughness.
  • High performance - permits high anchor strength and expansion capacity.
  • Easy operation - only a hammer is needed for installation; in addition, only a smaller hole is needed, with much smaller gaps between strike anchor and the base material.
  • Convenient - visually inspectable after installation.
  • Long lasting - heated treated and yellow zinc plated to discourage corrosion.

Applications:

  • Steel structures.
  • Machine fabrications.
  • Cable trays.
  • Pipeline supports.
  • Tracks.
  • Elevators.
  • Brackets.
  • Suspended lighting.

Details:

  • Material: carbon steel in grade of 4.8 or other customized material.
  • Finish: yellow zinc plating.
  • Anchor diameter: 1/4" to 3/4' (Anchor diameters equals to hole diameters).
  • Anchor length: up to 6".
  • Drive style: hammer drive.
  • Pull out load: 475 kgs to 4450 kgs.
Hot specification of strike anchors
Code Diameter Length   Code Diameter length
SA-1 1/4" 1-3/4" SA-9 1/2" 4-3/4"
SA-2 1/4" 2-3/8" SA-10 1/2" 6"
SA-3 5/16" 2-3/4" SA-11 5/8" 4"
SA-4 5/16" 4" SA-12 5/8" 4-3/4"
SA-5 3/8" 2-3/8" SA-13 5/8" 6"
SA-6 3/8" 3-1/2" SA-14 3/4" 5"
SA-7 3/8" 5" SA-15 3/4" 6"
SA-8 1/2" 3-1/2"      

Inquiry for Our Product

SHUNFENG HARDWARE PRODUCTS CO., LIMITED.
E-mail: sales@bolts-nuts.com

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.